Home / Faqs

Frequently Asked Questions

Sort By

Search

Do aluminum railings last?

Aluminum railing is designed for long-term outdoor performance. It resists rust, corrosion, moisture damage and UV exposure, making it ideal for decks, porches and stairs in a wide range of climates. With minimal maintenance and durable finishes, aluminum railing helps protect both your view and your investment for years to come.

Can you cut aluminum deck railing?

Yes. Aluminum deck railing can be cut to fit your layout using standard metal-cutting tools outlined in the installation guide. This allows for clean customization around stairs, corners and unique deck configurations. Always follow RDI Railing installation instructions to maintain structural performance and code compliance.

Are aluminum railings sturdy?

Yes. Aluminum railings from RDI Railing are engineered for strength, stability and code compliance. Powder-coated aluminum resists corrosion, weathering and fading while maintaining structural integrity over time. Our innovative ProLock® locking system delivers a clean design finish, securing your railings by connecting them from the inside out. When properly installed, aluminum railing delivers dependable safety you can see and trust.

Is the baluster spacing the same for the stair rail panel for RDI® Avalon® Aluminum Railing?

Yes, but only when the stair section is level (0 degrees). Aluminum stair rail panels are designed for installation at angles ranging from 0 to 41 degrees. The higher the pitch of the rail, the closer together the spacing becomes. At maximum pitch, baluster spacing becomes about 3”.

What is the actual length of each rail section for RDI® Avalon® Aluminum Railing?

Avalon Aluminum Railing® panels and top rails are 1/2″ shorter than the nominal dimension. This is to allow room for the mounting brackets and rail end caps. For example, an 8’ x 36″ panel is actually 95 1/2″ long. Once installed, accounting for bracket size, space between posts will be 96″.

What are the types of posts available for RDI® Avalon® Aluminum Railing?

Avalon Aluminum Railing posts are available in residential grade or commercial grade. Posts are available for where the top rail nests between the posts (2 1/2″ posts or 4 1/4″ posts) or where the top rail sits over the top of the posts (2″ posts).

Does RDI® Railing offer aluminum railing for handicap access ramps?

Avalon Aluminum Railing level rail kits are designed to install up to a 5-degree slope, which is the maximum pitch allowed by code. Use level rail sections and stair rail brackets.

Can I install RDI® Avalon® Aluminum Railing on concrete?

Yes, RDI Railing offers two choices to mount Avalon Aluminum Railing on concrete. You can core mount in the concrete using either of our face/core posts or use our flush mount post with a high-quality concrete anchoring system.

Can I use RDI® Avalon® Aluminum Railing on a second story?

Yes, Avalon Aluminum Railing® meets or exceeds all code requirements. It is important to always check with your local code enforcement office for the requirements on your project.

What type of saw can I cut RDI® Avalon® Aluminum Railing with?

Avalon Aluminum Railing® can be cut with most saw types. When using a power miter saw, a high tooth count (80 or more) carbide tip is best. Be sure to have the blade up to speed before beginning your cut. Hacksaws and other saws with metal cutting blades will also cut aluminum railing.

Do you have load-bearing posts for RDI® Aluminum Railing?

Yes, you can use the 4 1/4″ x 4 1/4″ x 108″ columns with mounting kits for both the top and the bottom of the column.

How do I manage the posts at the top of the stairs for RDI® Avalon® Aluminum Railing with Cable?

Double post at the top of the stairs. Stair posts were engineered so that the cable would not hit the nose of the stairs and also prevent a 6” sphere violation.

What limitations are there with corner installations for RDI® Avalon® Aluminum Railing with Cable?

A maximum of 2 corners or 40 ft of cable through a corner is allowed before needed to double post. If you have more than 2 corners in a run, you will need to choose a location to double post. If you have a corner post and more than a 40’ run of cable, you will need to double post that corner. This allows the tension required to be achieved.

Can I install RDI® Avalon® Aluminum Railing with Cable at angles other than 90 degrees?

Yes, but angles other than 0 or 90 degrees require double posting.

Can I install RDI® Avalon® Aluminum Railing with Cable with fascia mounted posts?

Yes, but the mid baluster supports that come with cable beam kits cannot be used. Rather, space fascia posts 4” apart for fascia cable applications.

What level of tension is recommended for my RDI® Avalon® Aluminum Railing with Cable?

225 pounds of tension is recommended for each row of cable.

What is the actual length of each rail section for RDI® Elevation® Rail Aluminum Railing?

Elevation 6’ cable panels and beam kits are 68” long, resulting in a 6’ installed rail section on center of the attached posts.

What is the maximum and minimum allowable span between posts for RDI® Elevation® Rail Aluminum Railing?

Elevation Rail has a maximum span of 68” between posts. The minimum span requirement is 16” for a 36”-tall rail and 18” for a 42”-tall rail.

Still Have Questions?

Find answers and the right Resources

A black railing on a wooden deck is shown in sunlight, next to a tree trunk. It leads to a porch with plants. The scene is peaceful and inviting.

Railing 101

Understand the basics of styles, materials, and key considerations for framing your view

Learn More

A man with glasses and a beard is working from home, smiling while talking on the phone. He wears a green shirt, sitting at a laptop in a bright kitchen.

Contact Us

Have questions about products or planning? Our team will point you in the right direction.

Get Support

Open magazine displaying "Railing Style Trends." The left page shows a stylish indoor railing; the right features small images of outdoor railings. Modern and elegant.

Resources

Get the right information fast, from planning tools and inspiration to spaces and guides.

Browse Resources

bring the dream to life

Let’s build the view together

Get started today. Find an installer or a nearby retailer to plan, price and get everything you need start your project with confidence.